Choose one of the following procedures to degas your sample:
• Stir the sample until no more bubbling occurs. Note that this can take up to 15 minutes.
• Put the sample in an ultrasonic bath for approximately 5 to 10 minutes.
• Fill the sample into a flask, and seal the flask with a stopper. Alternately shake the flask and lift the stopper to release the pressure until no pressure is built up anymore.
• Fill the supplied syringe half with your sample. Then seal the tip of the syringe with your finger and pull back the green plunger. Take your finger off the tip and let the extracted gas escape from the syringe. Push the plunger forwards to press the air out of the syringe. Repeat the specified steps several times.